Acura RDX 2019, Owner'S Manual

Page: 417 / 651

415
uu When Driving u Starting the Engine
Driving
1. Depress the brake pedal and press the ENGINE START/STOP button
simultaneously.
2. Keeping your right foot on the brake pedal, put the transmission into
( D
. Select
( R
when reversing.
3. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
u Make sure the Parking Brake and Brake System indicator (red) goes off.
2 Parking Brake P. 486
2 If the Transmission System Indicator Blinks along with the Warning
Message
P. 614
■
Hill start assist system
Hill start assist keeps the brake engaged briefly to help prevent the vehicle from
rolling on inclines as you move your foot from the brake pedal to the accelerator.
Put the transmission into
( D
or
( S
when facing uphill, or
( R
when facing downhill,
then release the brake pedal.
■
Starting to Drive
1 Starting to Drive
You can also release the parking brake by pulling the
electric parking brake switch while depressing the
brake pedal. When facing downhill, you can start
your vehicle more smoothly by manually releasing it
with the electric parking brake switch than by
releasing it with the accelerator pedal.
The engine stops when the transmission position is
changed from
( P before the ENGINE START/STOP
button is pressed. Follow step 1 when starting to
drive.
When the engine was started using the two-way keyless
access remote
*
When the engine was started using the two-way keyless access remote *
When the engine was started in any case
1 Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very steep or slippery slope, and
will not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
Hill start assist will operate even when VSA ® is
switched off.
* Not available on all models
19 ACURA RDX-31TJB6000.book 415 ページ ２０１８年４月２６日 木曜日 午後４時５１分