Acura RDX 2019, Owner'S Manual

Page: 204 / 651

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System
202
Co
ntrols
1. Set the power mode to ON. Adjust the
driver’s seat and the door mirrors to the
desired position.
2. Press the SET button.
u The memory button indicator light will
blink.
3. Press and hold memory button
( 1
or
( 2
within five seconds of pressing the SET
button.
u Once the seat and the door mirror
positions have been memorized, the
indicator light on the button you pressed
stays on and you will hear the double-
beep.
1. Put the transmission into ( P .
2. Apply the parking brake.
3. Press a memory button ( ( 1 or ( 2 ).
u The indicator light will blink.
The seat and the door mirrors will
automatically move to the memorized
positions. When they have finished moving,
the indicator light stays on.
■
Storing a Position in Memory
1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat or the door mirror position
before the double-beep.
•
You set the power mode to any position except
ON.
•
You press the mode selector up or down.
Models with mode selector
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position 1 Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
•
Press the SET button or memory button ( 1 or ( 2 .
•
Adjust the seat position or door mirrors.
•
Put the transmission into a position other than ( P .
•
Press the mode selector up or down.
Models with mode selector
Memory
Button 1
Memory
Button 2
19 ACURA RDX-31TJB6000.book 202 ページ ２０１８年４月２６日 木曜日 午後４時５１分