Acura MDX 2009 Manual Download Page 138

Page: 138 / 489

If you try to drive off with the tailgate
not closed completely, a beeper
sounds and a

‘‘

DOOR & TAILGATE

OPEN

’’

message is shown on the

multi-information display.

Keep the tailgate closed at all times
while driving to avoid damaging the
tailgate and to prevent exhaust gas
from getting into the interior. See

Carbon Monoxide Hazard

on page

If there is a problem in the power
tailgate system, you will see a

‘‘

CHECK POWER TAILGATE

’’

message on the multi-information
display. Have the system checked by
your dealer.

With this message shown on the
multi-information display, you can
still open or close the tailgate
manually.

Unlocking the Tailgate

Models with power tailgate

If the power door lock system cannot
unlock the tailgate, unlock it
manually.

Use a small flat-tipped screwdriver to
remove the cover on the back of the
tailgate.

Push the release lever to the right as
shown.

If you need to unlock the tailgate
manually, it means there is a
problem with the tailgate. Have the
vehicle checked by your dealer.

Tailgate

134

08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu

2009 MDX

Table Of Contents

Main Menu

Summary of Contents for MDX 2009










































































































































































































































































































































































































































































































Search results

Summary of Contents for MDX 2009

Reviews:

Related manuals for MDX 2009

Brands by name

Popular brands

Acura MDX 2009, Manual

Search results

Summary of Contents for MDX 2009

Reviews:

Related manuals for MDX 2009

Brands by name

Popular brands