Acura MDX 2009 Manual Download Page 412

Page: 412 / 489

2. Remove the socket by turning it

one-quarter turn counterclockwise.

3. Pull the bulb straight out of its

socket.

4. Push the new bulb straight into

the socket until it bottoms.

5. Turn on the lights to make sure

the new bulb is working.

6. Put the socket back into the light

assembly, and turn it clockwise to
lock it in place.

7. Place the cover back into the light

assembly. Push it up until it locks
in place.

Side Turn Signal Light

Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.

Rear License Plate Bulb

The license plate has two lights
above it. The bulbs should be
replaced by your dealer.

BULB

SOCKET

Lights

408

08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu

2009 MDX

Table Of Contents

Main Menu

Summary of Contents for MDX 2009










































































































































































































































































































































































































































































































Search results

Summary of Contents for MDX 2009

Reviews:

Related manuals for MDX 2009

Brands by name

Popular brands

Acura MDX 2009, Manual

Search results

Summary of Contents for MDX 2009

Reviews:

Related manuals for MDX 2009

Brands by name

Popular brands