2 of 7
BII09092-23 (1809)
© 2018 American Honda Motor Co., Inc. – All Rights Reserved.
TOOLS AND SUPPLIES REQUIRED
Phillips screwdriver
10 mm open end wrench
Small flat-tip screwdriver
Ratchet
10 mm socket
Diagonal cutters
Tape
Isopropyl alcohol
Shop towel
Blanket
The following tools are available through the Acura Tool
and Equipment Program. On the iN, click on Service >
Service Bay > Tool and Equipment Program, then enter
the number under “Search.” Or, call 888-424-6857.
• Trim Tool Set (T/N SOJATP2014)
• Plastic Trim Tool (T/N SILTRIMTL10)
INSTALLATION
1.
Disconnect the negative cable from the battery.
2.
Remove the driver’s outer dashboard trim.
Client Information: The information in this installation
instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
CLIPS (2)
DRIVER’S OUTER
DASHBOARD TRIM
3.
Remove the driver’s inner dashboard trim and
disconnect the Engine Start/Stop switch connector.
4.
Open the glove box and remove the passenger’s
dashboard trim panel.
CLIPS (4)
ENGINE START/STOP
SWITCH CONNECTOR
DRIVER’S INNER
DASHBOARD TRIM
CLIPS (6)
PASSENGER’S
DASHBOARD TRIM
PANEL
