1
Hearth & Home Technologies • IFT-RC400 User Guide • 2326-983 Rev. J • 2/20
User Guide
IFT-RC400
IntelliFire Touch
®
Remote Control
FUNCTIONS
DYNAMIC ICONS
INDICATOR BAR
SCREEN
SCREEN
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
Thermostat
Introduction
This user guide serves as a quick reference to the screen,
functions and indicators on your IntelliFire
Touch Remote
control.
FUNCTIONS
FUNCTIONS
SELECTION
INDEX
ROOM TEMPERATURE
DISPLAY
Flame Height
You can set your desired flame height level to affect the
ambiance and control the heat output.
Your appliance will remember the previous flame height
setting and adjust the flame to that level 10 seconds after
start.
You can set and maintain your desired room temperature
with the thermostat function. This function automatically
adjusts your appliance to maintain the desired set
temperature (ST).
To achieve the most accurate thermostat function, place
your remote control in the same general space that
you want to have the temperature controlled by your
appliance. For best results, keep your remote
control away from direct radiant heat from the appliance,
adjacent windows and doors, HVAC vents, and direct
sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next,
simply select your desired set temperature by using the
arrow keys and press ON to confirm the setting. The
actual room temperature (RT), measured by your remote
control, will be displayed in the upper right corner of the
main menu screen. To turn the thermostat function off,
simply select thermostat on the main menu screen and
select OFF.
If the RT cools to more than 2 °F lower than the ST for
at least 2 minutes, then your appliance will automatically
turn ON. The thermostat function will automatically adjust
the flame height based on the difference between the RT
and the ST. As the RT rises closer to the ST, the flame
height will automatically adjust down. If the RT rises 2 °F
above the ST for at least 2 minutes, then your appliance
will automatically turn OFF.
During thermostat use, you will not be able to set your
desired flame height level. Your appliance will
automatically adjust flame height based on the difference
between the RT and ST.
1
OFF
2
3
4
Fan Speed
