Acura 2015 RDX Quick Reference Manual Download Page 76

Page: 76 / 365

Indicators

Continued

strum

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Lights On
Indicator

●

Comes on whenever the light
switch is on, or in

AUTO

when the

exterior lights are on.

●

If you set the power mode to ACCESSORY
or VEHICLE OFF (LOCK) while the lights are
on, a chime sounds when the driver's door
is opened.

—

Fog Light
Indicator

●

Comes on when the fog lights are
on.

—

Side Airbag Off
Indicator

●

Comes on for a few seconds when
you set the power mode to ON,
then goes off.

●

Comes on when the passenger side
airbag system is automatically shut
off.

●

It does not mean there is a problem with
your side airbags.

●

Comes on when nobody is sitting in
the passenger seat

- Have the vehicle

checked by a dealer.

●

Comes on when someone is sitting in
the seat

- Have the passenger sit properly.

Immobilizer
System Indicator

●

Comes on briefly when you set the
power mode to ON, then goes off.

●

Comes on if the immobilizer system
cannot recognize the key
information.

●

Blinks

- You cannot start the engine. Set

the power mode to VEHICLE OFF (LOCK),
then select the ON mode again.

●

Repeatedly blinks

- The system may be

malfunctioning. Have the vehicle checked
by a dealer.

●

Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.

—

U.S.

Canada

U.S.

Canada

* Not available on all models

Summary of Contents for 2015 RDX














































































































































































































































































































































































Search results

Summary of Contents for 2015 RDX

Reviews:

Related manuals for 2015 RDX

Brands by name

Popular brands

Acura 2015 RDX, Quick Reference Manual

Search results

Summary of Contents for 2015 RDX

Reviews:

Related manuals for 2015 RDX

Brands by name

Popular brands