225
Features
Compass
*
When you set the power mode to ON, the compass self-calibrates, and the compass
display appears.
Compass Calibration
If the compass indicates the wrong direction, or the
CAL.
indicator blinks, you need
to manually calibrate the system.
1.
Set the power mode to ON.
2.
Press and hold the
SETUP
button until the
display shows the compass setting menu.
3.
Rotate
to
select
Calibration
, then press
.
4.
When the display changes to
Calibration
Start
, press
.
5.
Drive the vehicle slowly in two circles.
u
The compass starts to show a direction
after the calibration. The
CAL.
indicator
goes off.
1
Compass
*
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
Compass Setting Menu Items
1
Compass Calibration
Calibrate the compass in an open area.
While setting the compass:
•
The
BACK
button returns to the previous screen.
•
The
SETUP
button cancels the setting mode.
* Not available on all models