10 of 18
BII12560-03 (1907)
© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
With Other Accessory Harness 12-pin Connector
37. If the 12-pin connector is already used by other
accessory, locate the 12-pin connector taped to the
other accessory harness. Remove the dummy
connector from other accessory harness
12-pin connector, and plug the door sill trim harness
12-pin connector into the other accessory harness
12-pin connector.
DOOR SILL TRIM
HARNESS 12-PIN
CONNECTOR
FUSE BOX
DUMMY
CONNECTOR
(Do not reuse.)
FRONT VIEW
OTHER ACCESSORY
HARNESS 12-PIN
CONNECTOR
OTHER ACCESSORY
HARNESS 12-PIN
CONNECTOR
38. Secure the door sill trim harness to the vehicle
harness with two wire ties.
39. Route the door sill trim harness as shown. Line up
the green tape on the door sill trim harness with the
vehicle harness as shown, and secure the door sill
trim harness to the vehicle harness with one wire tie.
WIRE TIE
FUSE
BOX
DOOR
SILL TRIM
HARNESS
WIRE
TIE
VEHICLE
HARNESS
GREEN
TAPE
FUSE BOX
VEHICLE
CONNECTOR
DOOR SILL
TRIM
HARNESS
VEHICLE
HARNESS
WIRE
TIE
