9
Chapter 2-2 Configuring IP addresses using HTML page
To change an IP address using a HTML page, type the default IP address
(192.168.0.200) into the Internet browser and follow the steps below:
Login to the H.264 Full HD AiP camera using default username “admin” and
default password “pass”
Click the “Basic Mode” configuration hyperlink
Click the “Network->General” hyperlink
To edit or modify addresses, subnet mask, gateway, or HTTP port, use the
edit box
Click “Submit”
Chapter 2-3 Internet browser settings & software components required
Make sure your Internet browser allows signed ActiveX plug-in to run on your PC.
Set “Download Signed ActiveX plug-in controls” to “Prompt” and “Run ActiveX
control and plug-in” to “Enable”. You can set this by Internet
Explorer->Tools->Options->Security Settings.
Once complete, you can access the AiP camera’s live video by inserting the default
IP address into your Internet explorer browser. A security warning dialog box will
appear. Click “OK” to download the ActiveX directly from the AiP camera.
