20
see the AiP cameras via the UPnP protocol.
To enable the UPnP service, visit Basic->Network->UPnP.
Chapter 4-10 Maintenance
The load default feature allows you to restore the factory settings. There are
certain settings such as IP addresses and video systems that are not affected by
this operation. To reboot the H.264 Full HD AiP camera, click the Reboot System
hyperlink.
To update the firmware for the AiP camera, click the Firmware
Update hyper
link. Locate “flasham32.bin” in your computer by clicking “Browse”. Click “Submit”
to finish the firmware upgrade.
