DVR User Manuel 63
2.3-7-3 System status
•
HDD(s)—HDD(s) detecting status
for the DVR
•
HDD Recording Start—start
recording time of the DVR
•
HDD Recording End – end recording
time of the DVR
•
HDD Percentage – recording
percentage of the DVR
•
Approximate Rec Days—total
recording hours available for the
HDD(s)
•
Approximate Rec Hours—total
recording days available for the
HDD(s)
•
Current Written HDD—the HDD of
the DVR in writing
•
Already Overwritten—the HDD(s)
has been overwritten.
•
HDD Writing Speed—HDD writing
speed detector
•
HDD Reading Speed—HDD reading
speed detector
•
Device ID—DVR ID/RS-485 ID
•
Last Reboot Time – last time for
rebooting the DVR
•
Kernel— OS version of the DVR
2.3-7-4 Firmware update
This DVR is set to perform firmware upgrade via network. After the DVR receives the firmware, it
starts to perform firmware upgrade automatically. After finishing the firmware update, the HTML
page will reload. The user can then continue to operate the DVR.
To perform network firmware update, click on Browse button and locate the firmware.
Note:
Ensure there is a good connection whilst attempting a firmware update. Failure in the
network connection could result in firmware update failure and the unit may become non-
operational.
