DVR User Manuel 55
1.7-2 PTZ transport
Select from ONVIF, HTML or RS-485 transport. If RS-485 is selected the camera must be
connected to the RS-485 output on the back of the DVR.
1.7-3 PTZ protocol
PTZ protocols include MLP1, MLP2, Pelco D, and Pelco P.
1.7-4 PTZ model and baud rate
If the PTZ protocol is transmitted via traditional RS-485 wires attached to the DVR you need to
setup the baud rate and RS-485 ID respectively.
Table below shows listed models in the PTZ protocol list:
Model
Baud Rate
Number of Bytes
CO
-
93
(MLP1)
9600
3
CO
-
95
(MLP1)
9600
3
CO
-
9
7 (MLP1)
9600
3
CO
-
98
(MLP2)
9600
7
CO
-
99
(MLP2)
9600
7
Pelco D
2400~9600
None
Pelco P
2400~9600
None
1.7-5 Preset setup
All features of PTZ can be configured from the live menu. You can also enter preset positions
through the preset set up option in the PTZ menu
Setting preset
Enter the preset setup then select your desired preset point from the dropdown bar
Enter dwell
Define the dwell time of a preset using the dropdown menu to select desired time. Dwell
number ranges from 0 to 255 seconds (the shortest to the longest).
