manualshive.com logo in svg

aculab E1, Installation Manual, Page: 18 / 31

Share
Download
aculab E1 Installation Manual Download Page 18

E1/T1 PCI card installation guide 

18 

Canadian EMC Requirements 

This Class A digital apparatus meets all requirements of the Canadian interference-causing 
equipment regulations. 
 
Cet appareil numerique de la Classe A respecte toutes les exigences du reglement sur le materiel 
brouilleur du Canada. 

Usage and Type 

The E1/T1 PCI card is principally designed for use connected to a 1.544 Mbps T1 digital service 
configured for primary rate ISDN (PRI) with National ISDN 2 signalling. Other types of private 
circuit use are also appropriate, and other signalling systems are available or planned. 
 
Please contact Aculab for details of supported protocols. 

Functionality 

• Call 

initiation 

• Call 

clearing 

• Call 

answering 

• B-channel 

switching 

• Host 

independent 

installation 

• 

Application program generated by the user 

• 

Independent Operation of the network ports (one or more ports attached to the public 
network) 

• 

Operational code running from RAM 

Speech Calls 

If the E1/T1 card is used in an application that makes or answers calls with a service code that 
indicates a speech or telephony call, or any call that may use a partly analogue route, there is a 
requirement that audio signals transmitted are encoded using CCITT 

µ

-law PCM. 

 
Many of the speech and FAX resource cards that may be used with the E1/T1 card comply with 
this requirement. It is the responsibility of the user to ensure that this requirement is complied 
with, by confirmation via the manufacturer of the card, or by any other suitable means such as 
independent testing. 
 
Signal sources that do not in themselves guarantee compliance with this requirement must be 
conditioned by appropriate circuitry before transmission. 

Card Installation & Connection 

Safety Warnings 

Interconnection circuits should be such that the equipment continues to comply with the 
requirements of UL60950-1/CSA C22 for SELV circuits, after making connections between 
circuits using any of the internal ports. 
 
Refer to a competent telecommunications engineer before installation and connection to the 
network is made. 

Summary of Contents for E1
































Reviews:

No comments