E1/T1 PCI card installation guide
17
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe system, if present, are connected together
(bonded). This precaution may be particularly important in rural areas.
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or
electrician, as appropriate.
Service Requirements
In case of equipment malfunction, Aculab Plc should carry out repairs. It is the responsibility of
users requiring service to report the need for service to our company.
Contact details for the USA and Canada offices, (Aculab USA Inc) are available from the Aculab
company web site at
http://www.aculab.com
. (E-mail: [email protected])
Approval Number USA
Approval Type
FCC part 68 XD Component Registration
Approval Number
US:5TC XD NA N PM4modT1
Approval Holder
Aculab plc
Lakeside,
Bramley
Road
Mount
Farm,
Milton
Keynes
MK1
1PT,
UK
FCC approves the apparatus for connection to public T1 services as specified in the approval
certificate, this appendix, and the 'Instructions for Use' subject to the conditions set out in these
documents.
Approval Number Canada
Approval Type
Industry Canada CS-03 Issue 8
Approval Number
2789 9468 A (rev 1.5) 2789A — 12217 (rev 2)
FCC EMC Requirements
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area may cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
No changes or modification to the E1/T1 PCI card is allowed without explicit written permission
from Aculab as these could void the end user's authority to operate the device.
The card is only intended for use in commercial applications and should not be operated in a
domestic environment. It must only be installed by a professional engineer and good quality
shielded cables must be used between the network ports and the Channel Service Unit (FCC, IC
or UL Listed CSU) to ensure continued compliance to EMC regulations.