background image

17 

Specifications

 

TEMPERATURE RANGE 

Outdoor: -40

º

F to 158

º

F; -40

º

C to 70

º

Indoor: 32

º

F to 122

º

F; 0

º

C to 50

º

HUMIDITY RANGE 

Outdoor: 1% to 99% 
Indoor: 1% to 99% 

WIND SPEED 

0 to 99 mph; 0 to 159 kph 

WIRELESS RANGE 

330 ft / 100 m depending on home construction materials 

OPERATING FREQUENCY 

433 mhz 

POWER 

Display: 5V, 100mA power adapter 

3 x AA alkaline batteries 

Sensor: 4 x AA alkaline or lithium batteries 

DATA REPORTING 

Wind Speed: 18 second updates 
Outdoor temperature & humidity: 18 second updates 
Indoor temperature & humidity: 60 second updates 

FCC Information 

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 
1- This device may NOT cause harmful interference, and 
2- This device must accept any interference received, including interference that may cause undesired operation. 
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to oper-
ate the equipment. 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits 
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
• Reorient or relocate the receiving antenna. 
• Increase the separation between the equipment and the receiver. 
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
• Consult the dealer or an experienced radio/TV technician for help. 
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications 
could void the user authority to operate the equipment. 
This device complies with Industry Canada licence-exempt RSS standard(s). 
Operation is subject to the following two confitions: 
(1) This device may not cause interference, and 
(2) This device must accept any interference received, including interference that may cause undesired operation of the device. 

Summary of Contents for 01607BPDI





















Reviews: