5 PREVIEW THE DISPLAY
Main Unit - Upper Display - Weather
Main Unit – Lower Display – Date and Clock
Using the included LOW TEMPERATURE ADAPTOR
MON
TUE
WED
THU
FRI
SAT
SUN
MOON
REMOTE
MAIN UNIT
0
-1
-2
-3
-6
-12
-.24
-.18
-.12
-.06
0
+.06
+.12
+.18
+.24
- 8
- 6
- 4
- 2
0
+2
+4
+6
+8
>
>
>
>
inHg/Hr
Hr/hPa
INDOOR
OUTDOOR
PRESSURE
FORECAST
Weather Forecast
Graph shows air pressure history
Alarm has
been set
Moon Phase
Antenna is
receiving the
time & date
signal
Low Battery Indicators
Month/
Date/
Day
Barometric
Pressure at a
given hour.
Outdoor Temperature
& Humidity
Wireless sensor channel Number
Indoor Temperature
& Humidity
Minimum/
Maximum
memory
mode
indicator
5
4
0
NORMAL
TEMPERATURES
NORMAL
TEMPERATURES
Wireless Sensor is
weather-resistant and
can be placed outdoors
The wireless sensor will operate normally down to -4 ºF. Below -4 ºF, the electronics
may operate erratically or become non-functional until the temperature raises again.
In case temperatures fall below -4ºF, bring the wireless sensor indoors and use the
included low temperature adaptor by running the wire out through a soft seal opening
such as a window or door. When routing the wire for the low temperature adaptor,
make certain that the wire will not be severed or damaged.
WIRELESS
SENSOR
LOW-TEMP.
ADAPTOR
LOW-TEMP.
SENSOR
EXTREMELY LOW
TEMPERATURES
low-temp adaptor
is used outside to
observe temperature
Wireless Sensor is
protected indoors in
extreme temperatures
INDOOR
OUTDOOR
-4 ºF
NOTE:
The wired TEMPERATURE ADAPTOR only observes temperature, not humidity.
If the adaptor is placed outdoors, and the wireless sensor is indoors- the wireless
sensor will only transmit the indoor humidity reading & the outdoor temp. reading.
Wireless Sensor - Display
Press the “
MODE”
button inside the back of the wireless sensor to display temperature
and/or humidity in one of three ways:
1)Temperature continuously,
2)Humidity continuously, or
3)Temperature for 5 seconds, then humidity for 5 seconds
NOTE:
The sensor’s display setting does not affect the main unit’s display.
86.
5
F
1
25
1
86.
5
F
1
25
1
Channel
(sensor #)
(Alternate icon)
Display Mode 1
(Temperature)
Display Mode 2
(Humidity)
Display Mode 3
(alternating temp. & Humidity)
press
“mode”
button
press
“mode”
button
EXTREMELY LOW
TEMPERATURES
OR LOWER
