Recharge the battery c
TROUBLE-SHOOTING GUIDE
Power Supply not plugged in socket
Check that the Power Supply is plugged-in
Overheating due to prolonged lowering
Let Power Supply cool down until LED
is steadily lit. Perform lowering operations
with more cooling intervals to prevent the
Power Supply overheating
No power to Ascender
Disengage the emergency stop.
Check ACC Power Supply cable
Probable cause
Remedy
Power circuit fuse blown;
Too high power consumption
Power circuit fuse blown;
Short circuit
Overheating due to bad ventilation
Overheating of Ascender (feel chassis)
Unplug other devices from the
power circuit
Check for damage to cables or
for water and/or humidity in close
proximity of all power connections
Ensure air vent is not covered. Ensure that
outside temperature is not too high
Let Ascender cool down and perform lifting
with more frequent cooling intervals
No power to
Power Supply,
red LED off
Ascender is not
working,
Power Supply
LED is blinking
Ascender is not
working, Power
Supply LED is on
Problem
If you need further assistance or are in any doubt,
please contact ActSafe Systems or an ActSafe
approved distributor.
I
Actsafe_Power_Supply_Manual_vAW_v3.indd 10
07/04/2015 14:14