background image

5

4

Zone Control / Remote Sensor Installation

Power Supply Options (applicable for both zone controller and remote sensor)

a

  AAA Battery Supply

Maximum 20m from the 
nearest power junction.

1.5V

AAA

1.5V

AAA

1.5V

AAA

AAA

+

-

AAA

+

-

AAA

AAA

+

+

-

-

1.5V

AAA

4 x AAA - Zone Controller
2 x AAA - Remote Sensor

NOTE: 
Do not use a battery and 12VDC power supply at the 
same time. This type of set up could damage the 
controller. Prolonged usage of battery may result in 
leakage and will eventually damage the PCB. 

To damper motor

Maximum 20m from the
nearest power junction.

approx. 1.5m

from the ground

Location

•  ENSURE that the zone device (zone controller or remote sensor) distance 

from wall controller (master or secondary) is within the recommended 
RF range of 30m.

•  Do not install the zone devices on external walls, directly below the supply air 

grille or near other additional heat load sources, as these locations may alter 
sensor readings.

•  Do not install zone devices near magnetic, metallic objects or install near 

power cables as these may effect the RF performance.

•  Avoid looping a longer cable as this may emit an electric noise.

•  Ensure there is ample space (25cm) around the zone device to ensure proper 

air temperature reading and adequate access for removal.

•  It is recommended to use the included wall mates to hold mounting screws.

•  In the event a defective device is replaced, remember to pair the new one 

to the master wall controller.

•  Use a maximum of 20m Cat5E cable.

•  Plug the power cable into its designated zone damper terminal 

or zone module terminal (using 3-way cable joiner).

•  DO NOT use battery and zone power cable at the same time. 

•  Make sure that the zone devices are installed in an upright position.

Dining

Dining

24.0 C

o

24.0 C

o

Zone OFF

Zone OFF

AC OFF

AC OFF

OFF

OFF

Dining

Dining

24.0 C

o

24.0 C

o

Zone OFF

Zone OFF

AC OFF

AC OFF

OFF

OFF

b

  12VDC using Cat5E cable (Green Cat5E spec cables with RJ45 connectors & cable boots) 

 

 

i) via damper motor option

 

 ii) or via 8Z-Module

8Z-Module

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

8Z-Module

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

1.5V

AAA

Summary of Contents for QUE QZB-100














Reviews: