Operation Manual - LR7 Wall Control
Document: 0525-075
Ver. 2 190912
Operation Manual
LR7 Wall Controller
10
2. Adjust the Indoor Fan speed (
LOW
,
MED
and
HIGH
) by pressing the
button successively until you reach the
desired speed.
NOTE
Additionally, whilst the system is Off, pressing
the
button will allow Fan Only operation.
10.02. Cooling Operation
1. Press the
button until
COOL
appears on the display.
2. Set the desired temperature by pressing either the
or
buttons.
3. Adjust the desired Indoor Fan speed by pressing the
button. Available settings are:
LOW
,
MED
,
HIGH
,
CONT LOW
,
CONT MED
and
CONT HIGH.
10.03. Heating Operation
1. Press the
button until
HEAT
appears on the display.
2. Set the desired temperature by pressing either the
or
buttons.
3. Adjust the desired Indoor Fan speed by pressing the
button. Available settings are:
LOW
,
MED
,
HIGH
,
CONT LOW
,
CONT MED
and
CONT HIGH.
NOTE
Setting the indoor fan speed to continuous mode can cause cool drafts when operating the system on heating mode
during compressor off cycles.
10.04. Auto Operation
Automatically changes between cooling and heating mode.
1. Press the
button until
AUTO
appears on the display.
2. Set the desired temperature by pressing either the
or
buttons.
Adjust the desired Indoor Fan speed by pressing the
button. Available settings are:
LOW
,
MED
,
HIGH
,
CONT LOW
,
CONT MED
and
CONT HIGH.
