Actron Super AutoScanner CP9145, User Manual

Page: 63 / 88

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 7
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Chrysler Historic Diagnostics
6
IDLE SPEED TEST
The Idle Speed Test is used to test the functionality of the vehicle idle speed
control system. The test allows the user to enter the desired engine speed. The
test vehicle should respond by matching the speed commanded. If the vehicle
matches the demanded engine speed, the idle speed control system is
functioning properly.
Select Idle Speed Test from the Chrysler
Functions list and press
(17(5
.
The tool instructions may vary depending
on the vehicle information entered.
However, in all cases it will instruct the
user to perform the following:
1) Set the Parking Brake.
2) Turn A/C off.
3) Start engine and let idle.
Keep hands and Tools away from fan and engine during
test.
Carbon monoxide (CO) and other vehicle emissions are
harmful or fatal to personnel. Always operate vehicle in a
well ventilated area.
Use the
83'2:1
arrow keys to change
the Ideal RPM (engine speed). The
vehicle should respond by matching the
Ideal RPM.
Press the
%$&.
or
%$&.
key to end the
test and return to the Chrysler Functions list.
SENSOR TEST
The Sensor Test is used to view the sensor outputs of some monitored vehicle
systems. The Sensor Test is similar to View Data, as it allows the user to read
the current output of various sensors throughout the vehicle.
Select Sensor Test from the Chrysler
Functions list and press
(17(5
.
:DKE>7DG@5F;A@E ^
S'I;F5:(7EF \
S5FG3FAD(7EF ]
[ S6>7'B776(7EF
! WARNING
! WARNING
6>7'B776(7EF
5FG3>&$!
673>&$!
\](A:3@97&$!
:DKE>7DG@5F;A@E ^
S6>7'B776(7EF \
[ S'7@EAD(7EF
&7H;7I3F3