Actron Professional Enhanced Scan Tool 9640A, User Manual

Page: 79 / 126

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 19
Ford Enhanced (OBD II) Diagnostics
6
Read All DTC
The Read All DTC function retrieves all DTCs (MIL, non-MIL, Pending and
Memory) stored in the vehicle’s computer module(s). This function can be per-
formed with the KOEO or KOER.
Select Read All DTC and press
ENTER
. The Scan Tool retrieves the
DTCs stored in the vehicle’s computer
module(s).
If a message displays stating SYSTEM
PASS: NO DTCS FOUND, press the
FUNC
key to return to the Ford Func-
tion List.
If DTCs are found, use the
DOWN
arrow
key to view them.
Write down the DTCs for reference. Use
the
UP/DOWN
arrow keys to review the
DTCs.
Press
FUNC
to return to the
Ford Func-
tion List.
Pending Codes
Refer to “Pending Codes” on page 4-3 of Global OBD II Diagnostics.
Erase Codes
Refer to “Erase Codes” on page 4-3 of Global OBD II Diagnostics. Perform
this KOEO. After erasing the DTCs, verify new ones have not been set using
the Read All DTC function.
View Data
The View Data function allows you to view the vehicle’s Parameter Identifica-
tion (PID) data in real time. As the computer monitors the vehicle, the informa-
tion is simultaneously transmitted to the scan tool. Apart from Read Codes,
View Data is the most useful diagnostic function for isolating the cause of a
vehicle driveability problem. View data is also used for observing sensor data
and the status of switches, solenoids, and relays.
Select View Data from the
Ford Func-
tion List and press
ENTER
.
Ford Function List |
1)I/M Readiness
2)Read MIL DTC [
` 3)Read All DTC ~
System Pass:
No DTCs Founded.
~
DTCs Found: 2
Use [ To View DTCs
Write Down Codes
For Reference ~
DTC P0110
Intake Air Temp
Circuit Malfunction [
~
Ford Function List |
5)Erase Codes ]
` 6)View Data [
7)View Freeze Data ~