18
Example of code series 11, 13 and 23:
❊
PAUSE
❊
FLASH (pause) FLASH
(2.5 second pause,
then go to next code)
❊
PAUSE
❊❊❊
FLASH (pause) FLASH FLASH FLASH
(2.5 second pause,
then go to next code)
❊❊
PAUSE
❊❊❊
FLASH FLASH (pause) FLASH FLASH FLASH
(4.5 second pause, then start all over
again from the very beginning)
Example of code 12 only:
❊
PAUSE
❊❊
FLASH (pause) FLASH FLASH
(4.5 second pause,
then start over again)
After all trouble codes have been written
down, finish testing as follows:
OF
F
ON
TM
TOYOTA
CP9025
Replace cap
6) Turn ignition
key OFF
7) Remove Tool
from Connector and Replace
Connector’s Protective Cover
• The engine computer is now back to
normal.
TEST RESULTS
COMMENTS
No indication on
“CHECK” engine
light
You have a problem with the diagnostic circuit
which needs repair before using the code
scanner tools. Refer to vehicle service manual.
Rapidly flashing
“CHECK” engine
light
(About 4 times a
second)
Computer does NOT find a problem. If drive
symptom persists, be sure to perform a
thorough underhood inspection first. (Refer to
page7.) Then refer to vehicle service manual
for troubleshooting suggestions.
Any code(s)
Computer found problems in vehicle. Refer to
“Toyota Code Meanings”, page 22.
TOYOTA
Summary of Contents for Code Scanner CP9025
Page 49: ...49 NISSAN...
