ACBU011/ACLU011 User Manual
Page 1
3
of 23
IV.Redundancy Controller Connection via Terminal
Run Redundancy Terminal v 1.1 on your PC, when it opens you will see the start window:
Figure 6 — Start window
On the top of the window are situated the following menu tabs:
INTERFACE –
consist information about redundancy connection;
Serial port:
select COM port you want to connect to;
Exit:
select to quit program;
STATUS –
push
button
Read
to get current information about redundancy connector status.
You will see next window displayed in Figure 6.1:
