III. USING ACTON BLINK® S2
A. Riding & Beginner Tips
5
F - Forward
R - Backward
GO
STOP
Also, follow these tips:
B. Low Battery Charging
ALWAYS CHARGE THE BATTERY AFTER IT DRAINS.
The battery must get charged immediately after it drains for long term battery
longevity. If the state of charge is allowed to remain below minimum for too long, it
may not be able to be recharged.
There are three modes for ACTON BLINK® S2: BEGINNER, NORMAL and PRO. You may
change the modes from the App. Please download the app “ACTON” to your phone.
Currently we only offer the app for Android 4.3+ and iOS iPhone 5+. For your safety,
please set to BEGINNER or NORMAL mode on the app home page to start with. Only set
to NORMAL mode when you are a comfortable rider. Only set to PRO mode when you are
very familiar with the ACTON BLINK® S2 and have mastered both beginner and normal
modes.
You may also be able to use the App to control the front LED and rear LED, but the side
LED is for safety and cannot be switched off. The energy LED consumption is very minimal
and will not affect the riding range.
The following advice is a quick start quide. The remote is provided to control the
acceleration of the board for for all levels of rider .