ACTON Blink S2 Owner'S Manual Download Page 4

E. Radio Interference Precautions 

Please contact ACTON for further assistance.

II. PRODUCT INFORMATION 

A. Technical Specification

B. Part List

4

Deck 

32.2 inches long, Canadian Maple Wood,Aircraft Grade 

Wheels
Weight
Max Speed
Range
Max Incline Rate

20%

Max Rider Weight
Power
Battery Capacity
Charging Time
Remote Controller

Run time up to 90 min;

Recharge time 2-2.5 hour for regular charger

ACTON BLINK® S2 electrical skateboard
Remote controller
Skateboard Charger

Make sure the power switch is turned off whenever the ACTON BLINK® S2 is not in use or 

it will drain the battery. When the battery is drained, it is very susceptible to damage. 

When the ACTON BLINK® S2 is not in regular use, recharge the battery at least once a 

month until normal use is resumed.

Use only the recommended charger and use caution when charging. The charger should 

be regularly examined for possible damage to the cord, plug, enclosure or other parts. The 

charger should be operated only by an adult. Do not operate the charger near flammable 

materials. Unplug the charger and disconnect from ACTON BLINK

®

 S2 when not in use and 

charging is complete.

ACTON BLINK® S2 incorporates a sophisticated communication system to ensure 

connection between the remote controller and the skateboard. The connection could be 

unstable or lost when the remote controller’s battery is low. Stop riding when the remote’s 

low battery warning appears.(quick flashing lights). Human body could interfere with 

remote signal as well. Don't put remote in the pocket while riding.
Try to avoid areas with high-power electromagnetic radiating equipment, such as radio 

towers, powerlines or radar. In some rare cases, connection may also be lost due to 

unpredictable causes. As a safety precaution, ACTON BLINK® S2 will shut off immediately 

when the connection is lost. If a loss of connection happens more than once, stop use 

immediately and avoid using ACTON BLINK® S2   again in such areas.

83mm, 78A hardness
15 lbs / 6.8kg
18 mph/ 29 kmph
14 miles

250 lbs / 113 kg
Total 1000W 
36V / 4.4AH
2-2.5 hour
2.4 Ghz Bluetooth

Summary of Contents for Blink S2









Reviews: