8
5 Remove backing from mounting
plate adhesive gasket
6 Center openings and press
mounting plate onto duct
The adhesive gasket will hold
the mounting plate in place
1/4
7 Secure the mounting plate using (8)
#8 self-tapping screws
8 Insert unit into opening Be
sure the air will pass though the
ActivePure
®
Cell honeycomb
matrix
9 Secure the unit to the
mounting plate with (4) thumb
nuts
10 Plug unit into working
power receptacle
NOTE:
Unit requires power 24/7 Do not install where power to the unit will be cycled on and off
INSTALLING THE UNIT (CONT.)
4 Cut hole in duct using
3 5" hole saw
