7
PURIFICATION PLATE INSTALLATION
4
3
2
1
1. Remove the rear lint screen and the internal carbon filter (see page 6).
2. After determining the square footage (use the formula SQUARE FEET
= LENGTH X WIDTH) use the Purifier Setting chart (below or on the
faceplate of the unit) to determine the correct number of plates to
install.
3. Fully insert the needed purification plates (a,b,c) between the guide-
grooves in the sides of the plate cage (between the posts and clips)
making sure the metal clip on each side of the plate is in contact with
the metal screen on the plate.
4. Replace the carbon filter and reinstall the rear lint screen (page 8).
* Chart refers to heavily contaminated areas
*
