10
1. FAN CONTROL
The disbursement of cleansing properties is best accomplished with good air circulation .
The fan control should be set as high as reasonably possible without creating an
undesirable noise level . This will be determined by personal preference and the distance
you wish the cleansing properties to be dispersed .
Note: A ceiling fan can also aid in distribution of cleansing properties.
2. PURIFIER CONTROL
PURIFIER Control: Set the control at the nine o'clock position for one hour .
Adjust the control up or down after one hour based on the following criteria:
1 . In normal conditions, it is not necessary to turn the PURIFIER control indicator above
the area of the environment . (
refer to purifier chart on page 7
)
2 . Keeping in mind the previous statement (#1), adjust the purifier so that the scent of
ozone fades into the background 15-30 seconds after entering the environment .
3. AWAY MODE FEATURE
For maximum effectiveness in reducing air contaminants, turn the unit on high for 3-4
hours .
Air out room by opening doors and/or windows .
4. ION CONTROL
The normal setting of a DC ionizer is full negative . This
setting seems to work best in removing particulate
(cigarette smoke) as well as reducing static . When
trying to reduce static, if the full negative setting
results in more static, turn the ion control in small
increments towards the positive until the static is
relieved .
Purifier Control
Fan Control
Ion Control
SETTINGS AND ADJUSTMENTS
Caution: Always be sure a room or area is
UNOCCUPIED before performing the above
described Away Mode procedure.
