Appendix B: Motor-Power Board Connectors
Table 31. User Power connector (12-pos latchlock; unswitched)
PIN
CONNECTION
PIN
CONNECTION
1
Vcc
7
Vcc
2
Gnd
8
Gnd
3
Vpp
9
Vpp
4
Vcc
10
Vcc
5
Gnd
11
Gnd
6
Vpp
12
Vpp
IR Signal and Power
Originally available on the Motor-Power Interface Board and now integrated on the new
Plus
Motor-Power board, four connectors provide power and signal for fixed-range IR
sensors. A separate connector provides signal path for an additional four IR sensors.
Table 32. IR power and signal connectors (3-pos microfits)
PIN
SIGNAL
DESCRIPTION
1
Vpp Battery
12
VDC
2
IRn Switching
signal
3
Gnd Power/signal
ground
Table 33. Additional IR connector (8-pos latchlock 0.1 header)
PIN
SIGNAL
DESCRIPTION
1-4
IR4-7 IR
signals
5-8
GND Signal
common
L
EGACY
M
OTOR
-P
OWER
Figure 23. The Original P2 Motor-Power Board
The legacy Motor-Power
system is a two-board set that
connects the H8S controller’s
control signals to the original
Motor-Power board, and
provides connections for
switched radio and auxiliary
power, power and digital
inputs for IRs, charge-
detection port, and
emergency stop detector.
See the H8S-controller board
in
Appendix A
for interface
connection specifications.
Figure 24. Motor-Power interface board
68