User Manual of Network Camera
39
Figure 6-7
Port Settings
2. Set the HTTP port, RTSP port and HTTPS port of the camera.
HTTP Port
: The default port number is 80, and can be changed to any port range
1024 to 65535.
RTSP Port:
The default port number is 554.
HTTPS Port:
The default port number is 443, and can be changed to any port
range 1024 to 65535.
SDK Port:
The default SDK port number is 8000.
3. Click
to save the settings.
Note
:
it will ask for a reboot for the settings to take effect.
6.3.3 Configuring PPPoE Settings
Steps:
1. Enter the PPPoE Settings interface:
Configuration >Advanced Configuration > Network > PPPoE
Figure 6-8
PPPoE Settings
2. Check the
Enable PPPoE
checkbox to enable this feature.
3. Enter
User Name
,
Password
, and
Confirm
password for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
4. Click
to save and exit the interface.
Note
:
it will ask for a reboot for the settings to take effect.
