3
CONTENTS LIST:
1pc A-Frame Magnetic Indoor Bike Trainer
1pc Replacement Rear Wheel Axle Skewer
1pc Front Wheel Riser Block
ASSEMBLY INSTRUCTIONS
1. Unfold trainer and place on a level surface. Insert rear wheel axle between clamp
heads whilst the quick release lever is in the open position (Fig.1, Fig.2).
Adjust the left-
hand clamp head so it reaches the bicycle’s axle and lightly holds the
bicycle upright. Make sure that the slots in the clamp head align with your quick
release lever on your bicycle’s rear axle.
Please Note: Depending on the shape of your bicycle’s rear wheel axle skewer, it may
be necessary to use the skewer that is provided with the trainer.
Fig.1 Fig.2
2. With the bicycle in position, push down on the trainers release lever to clamp the
bicycle securely into the trainer (Fig.3). Tighten the locking ring on the left hand side
clamp head to the frame of the trainer.
Please Note:
The lever should feel firm to push. However it doesn’t require excessive
force as this could damage the lever.
Fig.3
