background image

 

Turn off the Time Talking Sound but Retain the Alarm Sound  
(S1): 

1.

 

To turn OFF the Talking Sounds of the S1 button completely, hold down S1 (the top 
button) until the clock says, “Time is OFF”.   

2.

 

When the S1 button’s talking is set to OFF, the clock does not talk time, date and/or 
signal reception status when S1 is pressed.    

3.

 

The LED backlight will function whether S1 Talking is set to On or Off.    

4.

 

The Alarm Clock will still “Beep” according to your alarm time setting.  Furthermore, 
the other buttons will still talk when the S1 Time Talking is set to OFF. 

5.

 

To turn the S1 talking sound back on, hold the S1 button until the clock says, “Time 
is On.” 

 

Backlight (S1):

 

The backlight switches ON when the Top Button (S1) is pressed and held. 
 

Volume Control (S4): 

Slide S4 on right side of clock to change the volume of the clock: High, Medium, Low or 
Off.

 

 

Completely Silence the Clock (No talking and no alarm sound)  
(S4): 

Slide S4 Volume Control to the OFF position to silence the clock. There is no alarm 
sound and no Time Talking when the button is set to OFF position. 

 

Manual Time Setting (for countries with no time signal)  (S9 / 
S10): 

(You should use this function only when you travel to or are living in a country with no 
Radio Time Signal.) 
 
1.

 

Press S9 to manually set the Hour and S10 to set the Minute. 

2.

 

Listen very carefully to the clock to make sure the correct AM or PM has been set 
(Note:  If you set the wrong AM/PM the alarm clock will not be able to alert you at 
the correct time of day.) 

3.

 

Press S1 to confirm after you have set the Time manually (or the clock will confirm 
one minute later by itself.) 

4.

 

After confirmation, the clock automatically advances to the new time that you have 
set.  Wait until the clock hands stop running fast and resume normal operation to 
continue with any other functions. 

 

NOTE – NO MANUAL DATE SETTING FUNCTION:  This clock is 
only capable of setting the Hour and Minute.  It is not able to manually 
set the Date, Day, Month and Year.   Date is set only when time signal 
can be received in USA.

 

Summary of Contents for NMQ









Reviews: