Activate Corgi Power Hi-Lo, User Manual

Page: 14 / 22

13
LATERAL SUPPORT RELEASE
When placing the child into the wheelchair it is advised to
swing the lateral supports away to the sides of the chair. To
do this the ball underneath the attaching block can be
pushed up which will release the support to be swung away.
Ensure that the lateral support is clicked into place while the
wheelchair is in use.
LATERAL SUPPORT ADJUSTMENT
To adjust the positioning of the lateral support there are two bolts
on the back of the seat which can be loosened and the support will
then slide up and down, to the preferred position, and moved in to
support the trunk of the occupant.
Please ensure the bolts are fully tightened before using the
wheelchair.
ADJUSTING THE ARMREST
To adjust the height of the armrest there is a small hand
wheel which can be unwound to release the grip. The
armrest can then be pulled up or down and re-positioned
and the screw then tightened.
When adjusting the armrest ensure the occupant’s hands
are kept away from the armrest, to prevent catching
fingers when repositioning the armrest.
ADJUSTING THE HIP GUIDE
The hip guide can be adjusted for height by
releasing the hand wheel as shown
INCREASING WIDTH OF HIP GUIDE
To increase or decrease the seat width, the hip guides can be pulled outwards. This
is achieved by using a hand wheel which grips the main attaching bar of the hip
guide to the base of the seat. This handwheel is found underneath the seat. The
hand wheel can be loosened and the hip guide will then slide out to the preferred
position. The hip guides will slide out individually to fit the occupant. The hand
wheel will then need to be tightened in the new position before use.