7
Adding the
Batteries
Your
Activ8rlives
Pulse Oximeter
Bluetooth 4.0 uses two AAA batteries, which are supplied.
These are non-rechargeable batteries and no attempt should be made to recharge these.
Remove the back cover and add the
2 x AAA batteries in the direction indicated.
Replace the cover. The
DISPLAY
should light up now.
If not used, it will power off after about 30 seconds. A
faulty operation would make it power off.
Remove the batteries if you are planning to store the
device for a long period of time. We hope you use your
device for many years of course, but long periods of
storage with the batteries in place may damage the
device and will cause the batteries to discharge.
Replace the set of batteries (2 x AAA) in the right direction
when the battery sign on the
DISPLAY
is shown as “LO”.
2
Note: Do not tamper or attempt to open the unit in which the
battery is housed, your warranty will be invalidated. Substances
contained within the battery may damage the environment or
human health if handled and thus is a risk of electrical shock or
burns. When disposing of this product, ensure that it is collected
separately for special treatment and not as normal household
waste.
