ACTiSYS
ACTiSYS ACT-WF8000U
User’s Manual
Release 1.0a 2004. 4. 10
46 of 51
ACTiSYS Corporation
This page as below will appear.
Authentication Mode
This setting has to be consistent with the wireless devices, which the adapter intends to connect.
Open System –
No authentication is needed among the wireless devices.
Shared Key –
Only wireless devices using a shared key (WEP Key identified) are allowed to
connecting each other. Setup the same key as the wireless devices, which the adapter intends to
connect.
Auto –
Auto switch the authentication algorithm depending on the wireless devices, which the
adapter is connecting to.
Key Length
You may select the 64-bit or 128-bit to encrypt transmitted data. Larger key length will provide higher
level of security, but the throughput will be lower.
Default Key ID
Select one of the keys (1~4) as the encryption key.
Key Value
The keys are used to encrypt data transmitted in the wireless network. Fill the text box by following
the rules below.
64-bit
– Input 10 digit Hex values (in the “A-F”, “a-f” and “0-9”range) as the encryption keys. For
example: “0123456aef“.
128-bit
– Input 26 digit Hex values (in the “A-F”, “a-f” and “0-9” range) as the encryption keys.
For example:“01234567890123456789abcdef“.
