ACTiSYS
ACTiSYS ACT-WF8000U
User’s Manual
Release 1.0a 2004. 4. 10
44 of 51
ACTiSYS Corporation
Connect Station List
This screen shows all Adapters nearby.
General Connection Setting Table
Select the More Setting Page to access the Configuration menu, as shown below.
You can make changes to any of the fields shown below, without the need to restart
your computer.
Change
Click “Change” button to enable “General Connection Setting” page to Change the current settings.
Tx Power
TheWF8000U AP can operate in one of four Level, which are specified in the Level
field of the Configuration menu. Clicking the down arrow at the right of the Level field
displays the available level.
Channel
When communicating in Ad-Hoc mode, you must specify a channel on which
communications will take place. This field is grayed in infrastructure mode because
the Access Point automatically selects the channel.
Basic Rate
The Basic Rate field specifies the rate at which the radio in your WF8000U AP transmits and receives
data. You can set this to the following fixed rates: 1 Mbps; 2Mbps; 5.5 Mbps or 11 Mbps.
