WxB6x40Q Wireless Network Extender
Th
e Extender is now synced with the gateway/modem’s Wi-Fi settings.
Unplug the Extender and its power cable.
Connecting the Extender
Now that the Extender is synced with the gateway/modem’s wireless
network, it can be connected to the gateway/modem’s MoCA or Ethernet
network .To do this:
1. For Coax: Connect the included coaxial cable into the
Coax
port on
the rear panel of the Extender. Connect the other end of the coaxial
cable into the nearby coaxial outlet. (
25
ft
/lbs torque max
)
2. For Ethernet: Connect the included ethernet cable into a
Yellow
port
on the rear panel of the Extender. Connect the other end of the
ethernet cable into an ethernet port on the back of the Wi-Fi Router.
3. Plug the Extender’s power adapter into the
Power
port of the
Extender, and the other end into an electrical wall outlet.
4. If applicable, connect an Ethernet cable between one of the Extender’s
LAN ports and the Ethernet port of a non-wireless device (wireless
devices will connect via the wireless network).
5. Wait until the Wireless LEDs on the front panel of the Extender glow
green.
Th
is may take a few minutes.
Th
e Extender is now synced, installed, and extending the gateway/
modem’s wireless network in a previously weak area.
8
