28
Action
tec 54 Mbps Wireless Cable/DSL Router User Manual
29
Chapter 4
Using Advanced Setup
WAN IP Address
Selecting
WAN IP
Address
in the “Advanced Configuration” screen generates the
“
WAN IP
Address” screen.
WAN IP
Address allows manual set up of the
IP
address
of the Router. There are three ways to do this:
Obtain an
IP
Address through
PPP
o
E
,
Obtain an IP Address through
DHCP
, or
Specify a Static
IP
Address
.
☞
Note
: Some
DSL
providers use
PPP
o
E
to establish communica-
tion with an end user. Other types of broadband Internet con-
nections (such as fixed point wireless) may use either
DHCP
or
Static
IP
address. If unsure about which connection is present,
check with the
ISP
before continuing.
After selecting a connection type, click
Next
to continue configuring the connection.
Obtain an IP Address through PPPoE
Select this option to allow the Router to use the Point-to-Point over Ethernet
(
PPPoE
) protocol.
Summary of Contents for GT704WR
