3
Water
Bubble bath solution
01
Put 2.4 gallons water and 0.53 gallon bubble bath solution into a bucket. Fully stir BEFORE pouring into the water tank. Different bubble
bath solutions may have different foam effects and service time.
(The recommended ratio of bubble bath solution to water is 1:4 )
Pour the mixed solution into the water tank until water (not bubbles) reaches the rim of the tank. Foam
overflow
is
normal
while
filling
water
into
the
water tank. Important: Tank must be completely full of water and air tight to create the air pressure necessary to push out
the foam.
Stir
After placing water tank near the water slide,
connect yellow connector to yellow nozzle on
water tank.
PRESSURE
REGULATOR
Connect green
to green
on water tank.
connector
nozzle
B
02
03
A
2.4
GALLON
0.53
GALLON
FOAM SYSTEM INSTALLATION
Ⅲ
Firmly push end
of regulator hose
into 3-way switch.
Foam mixture ingredient: Children bubble bath solutions.
