Action S002147 Instruction Manual Download Page 10

Page: 10 / 29

[email protected]

MODEL: S002147

AFTER SALES SUPPORT

1800 465 070

Assembly Instructions (cont)

Step 4

1. Fit the L/R swing tube (24L/R) to the long axle (52) on the handlebar post (46) with allen bolt M10x20 (10),

spring washer (11), d-shape washer (9), flat washer (34) and waved washers (35). These bolts are pre-
assembled to the machine.

2. Attach the L/R pedal tube joint (39L/R) to the L/R crank (56L/R) with allen bolt M10x20 (10), spring washer

(11), d-Shape washer (9), flat washer (34) and waved washers (35) as shown. These are located in the bolt
pack.

NOTE: Tighten all bolts once this assembly step is complete.

3. Joint L/R swing tube (24L/R) and pedal support (15L/R) with the hex bolt (18), flat washer (5) and flat washer

(51) and nylon nut (6) as shown. These are located in the bolt pack.

4. Fit the L/R Handlebar (28L/R) to the L/R Swing tube (24L/R) with the Carriage bolt M8×45 (36), arc washer (20)

and nylon nut M8 (13) as show. These are located in the bolt pack.

Summary of Contents for S002147






























Search results

Summary of Contents for S002147

Reviews:

Related manuals for S002147

Brands by name

Popular brands

Action S002147, Instruction Manual

Search results

Summary of Contents for S002147

Reviews:

Related manuals for S002147

Brands by name

Popular brands