Console
Call for service 1-800-465-070 www.actionsports.com.au
GETTING STARTED
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor cover. Ensure that the safety key is installed, as the
treadmill will not operate without it.
When the power is turned on, a message will scroll across the dot matrix showing the current software
version. Then the Time and Distance windows will display Odometer readings for a short time, Time
window will show how many hours the treadmill has been in use and the Distance window will show
how many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has gone. The
treadmill will then enter idle mode, which is the starting point for operation.
Dot Matrix Center Display (Program Operation):
Twenty rows of dots (8 high) indicate each segment of a workout. The dots are only to show an approxi-
mate level (speed/incline). They do not necessarily indicate a specific value - only an approximate percent
to compare levels of intensity. In operation the Speed / Incline dot matrix window will build a profile
“picture” as values are changed during a workout.
When the Speed indicator - which is above dot matrix - is lit the dot matrix displays the speed profile and
when the incline indicator is lit the dot matrix displays the incline profile.
You may change the dot matrix profile view that you desired by pressing the DISPLAY button. After
scrolling through the three profiles which include incline, speed and speed profile, by pressing
the DISPLAY button, the dot matrix will automatically scroll through the three displays showing each one
for five seconds.
15
