User
Guide barebone actiNAS BB212-3
used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Page
42
of
70
G1DCW single-plate 2PIN
2PIN order
Description
Default setting
JCMOS1
CMOS Clear
No need to insert a
jumper cap
J7
ManufactureModeSelect
No need to insert a
jumper cap
J8
ME Recovery
No need to insert a
jumper cap
JCMOS1 introduction: use 2PIN jumper cap to insert into
JCMOS1, then short circuit of JCMOS1, used to Clear CMOS;
J7 Introduction: J7 is inserted with 2PIN jumper cap, then short
circuit of J7, and the system is used to upgrade ME. Generally, if
the ME needs to be upgraded, short circuit of J7 is needed via
jumper cap.
J8 introduction: use the 2PIN cable to insert J8, then let ME
Firmware be in Recovery mode, and some functions of ME are
limited.
