Actidata actiLib Autoloader 2U, User And Service Manual

Page: 82 / 84

10 Regulatory Information
This section describes the tape library compliance with safety and regulatory agency standards:
!
!
IMPORTANT To comply with the following regulations and standards, the tape library must be
properly installed in an office or industrial environment with shielded cables and
adequate grounding of the SCSI bus and the input power.
Countries
Standard European Union CE
USA/Canada
FCC, CSAus
Germany TÜV/GS
Device Standards

ANSI Small Computer System Interface-2 (SCSI-2), X3.131
– 1994

ANSI SCSI-3 Primary Commands, X3.301 - 1997

ANSI Information and Technology. SCSI-3 Medium Changer Commands (SMC), NCITS.314:1998

ANSI SCSI Parallel Interface-2 (SIP-2), X3.302:1998

IEC 60297 Rack Standards
FCC (United States)
The computer equipment described in this manual generates and uses radio frequency (RF) energy. If
the equipment is not installed and operated in strict accordance with the manufacturer’s instructions,
interference to radio and television reception might result.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Part 15, Class A, of the FCC Rules, is designed to provide reasonable protection against radio and
television interference in a residential installation. Although the equipment has been tested and found
to comply with the allowed RF emission limits, as specified in the above cited Rules, there is no
guarantee that interference will not occur in a particular installation. Interference can be determined by
turning the equipment off and on while monitoring radio or television reception. The user may be able
to eliminate any interference by implementing one or more of the following measures:

Reorient the affected device and/or its receiving antenna.

Increase the distance between the affected device and the computer equipment.

Plug the computer and its peripherals into a different branch circuit from that used by the affected
device.

If necessary, consult an experienced radio/television technician for additional suggestions.
Canadian Verification
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations (ICES-003, Class A).
Tested To Comply
With FCC Standards
For Home or Office
Use