Page 10
3. Using the actiDisk RDX Removable Hard Disk
Storage System
3.1 Operating the actiDisk RDX System
This section describes typical activities involved in operating and maintaining the actiDisk RDX system. For instructions on
using your backup software, see the manual that came with your software.
3.2 Handling the actiDisk RDX Cartridges
Although actiDisk RDX cartridges are rugged, it is always best practice to take extra care not to drop them when handling.
This will ensure data integrity and long life. Observe the following precautions:
• Store cartridges in their protective cases when you are not using them.
• Do not stack actiDisk RDX cartridges.
• Keep cartridges away from dust, dirt and moisture.
• Avoid direct sunlight, heat sources and temperature extremes or rapid changes in temperature.
• Never try to force the cartridge into the docking station. If it is diffi cult to insert, check the orientation and insure
correct alignment using keyed corner as a guide.
3.3 Loading and Unloading Cartridges
The front of your docking station has an opening for inserting actiDisk RDX cartridges. A protective door covers the ope-
ning. Below and to the right of the door is the power indicator that doubles as a cartridge-eject button.
To Load a Cartridge
Insert the cartridge in the docking station with the keyed corner facing the upper left corner of the docking station and the
write-protect tab on the back right (see
Figure 1
). The cartridge only fi ts in one orientation. Push the cartridge gently into
the docking station until it is locked in place with a clicking sound.
Figure 1. Loading the Cartridge
(1) Keyed Corner
(2) Write Protect Tab