USER MANUAL - DUAL ZONE AV MEDIA PLAYER EQUIPMENT ACT550
– ACT550/DAB+
480258-4.0
18/01/2021
Page 7 / 34
© ACTIA “Any reproduction of this document, even partial, is strictly forbidden without written authorisation”.
POL. IND. “LOS OLIVOS”
C/ CALIDAD, 66
28906 GETAFE
Tel: +34 91 665 26 26
Fax: +34 91 665 23 24
N.I.F. ES-A-28905065
Note!
For the remote control works with the ACT550
– ACT550/DAB+ equipment, link the remote
control with the equipment by pressing
[550]
.
Note!
Some controls may not be available in the vehicle controls.
3.1. Restore the Factory Settings
To restore the values of the factory settings:
1. Switch off the equipment.
2. Press and hold
[DISP]
while switching on the equipment
[
a
]
.
3.2. Reset of the Equipment
Note!
Perform a reset only if the equipment no longer responds to user controls.
To perform a reset, press the button
[RESET]
located on the left of the front panel (refer to Figure 1).
3.3. Reset and Restore the Factory Settings
Note!
Perform a reset and restore the factory settings only if the equipment no longer responds to user
controls.
1. Press
[RESET]
+
[DISP]
simultaneously for 5 seconds.
2. Release the button
[RESET]
while holding the key
[DISP]
until 3 beeps are heard.
3.4. Equipment Firmware Version
To display the equipment firmware version:
1. Switch off the equipment.
2. Press and hold the key
[1]
while turnning on the equipment pressing
[
a
]
.
The firmware version is displayed in the LCD screen.
