USER MANUAL - DUAL ZONE AV MEDIA PLAYER EQUIPMENT ACT550
– ACT550/DAB+
480258-4.0
18/01/2021
Page 34 / 34
© ACTIA “Any reproduction of this document, even partial, is strictly forbidden without written authorisation”.
POL. IND. “LOS OLIVOS”
C/ CALIDAD, 66
28906 GETAFE
Tel: +34 91 665 26 26
Fax: +34 91 665 23 24
N.I.F. ES-A-28905065
14. Installation and Connection
Use the interface diagram included in the package.
External antennas for AM/FM and
DAB+ reception are needed for a proper Radio operation.
Recommended AM-FM Antenna
ACTIA Systems recommends the use of its electronic
AM-FM Antenna
, reference
8390454
, with
the following features:
Frequency Range: AM (520 kHz
– 1620 kHz), FM (87 MHz – 108 MHz)
Impedance: 75
Ω
Voltage: 12 VDC
Polarization: Vertical
Emission: Omnidirectional
Gain: AM 3.5 dBi - FM 8.5 dBi
Temperature: -30°C to +80°C
Recommended DAB+ Antenna
ACTIA Systems recommend the use of a
DAB+ Antenna
, with the following features:
Frequency Range: DAB+ BIII (174
– 240 MHz)
Impedance: 50
Ω
Voltage: 5 VDC - 12 VDC
Polarization: Vertical
Emission: Omnidirectional
Gain: 2 dBi
WARNING
Choose the mounting location carefully so that the equipment will not interfere with the normal
driving functions of the driver.
CAUTION
Avoid installing the equipment where it would be subject to high temperatures, such as from direct
sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
CAUTION
Use only the supplied mounting hardware for a safe and secure installation.
