www.acti.com
Hardware Manual
15
Access the Camera
Before you begin, check that:
Your camera is operating properly and connected to the network.
The PC you are using is installed with Internet Explorer 11.
Follow these steps to access your camera through the Web:
1.
Open your browser; input the IP address of your camera in the address bar and then press
Enter
to open the login page.
2.
Enter the username and password and then click
Login
.
The factory default Account and Password of the camera:
Account:
Admin
Password:
123456
NOTE:
Install the ActiveX at your first login. When the installation of the ActiveX is completed,
open your IE to log in.
For your first login with Windows 7, if the system does not prompt you to install ActiveX,
follow these steps to turn off UAC: click the
Start
button, and then click
Control Panel
. In
the search box, type
uac
, and then click
Change User Account Control Settings
. Move
the slider to the
Never Notify
position, and then click
OK
. After UAC is turned off, log in
again.
If the installation failed, open
Internet Option
in IE before login. Click the
Security
tab,
click
Trusted sites
, and then click
Sites
to add the website. If you use Windows 7, you
need to save the setup.exe to your PC first, and then right-click the file, select
Run
as
administrator
, and then install it according to instructions.
