www.acti.com
Hardware Manual
8
Physical Description
Item
Description
1
DC 12V Power
Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter (not included). See
Error! Reference source not found.
on
page 17 for more information.
2
Ethernet Port
Connects to a network using an Ethernet cable with RJ-45
connector.
3
Reset Button
Restores the camera to its factory default settings. To reset the
camera, use a pin to press and hold the
Reset Button
for about
15 seconds.
4
Memory Card Slot
Insert a memory card into this slot for local recording purposes.
5
