www.acti.com
Hardware Manual
7
Safety Instructions
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
The lightning protection and grounding design of outdoor installation and wiring should be in
compliance with the lightning protection requirements of the buildings and local laws and
regulations.
Use of the product must be in strict compliance with the local electrical safety regulations.
Storage
Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating
source environment. Neglect may cause fire hazard.
To avoid heat accumulation, good ventilation is required for a proper operating environment.
DO NOT touch the heat dissipation component to avoid burns.
Transportation
Keep the device in original or similar packaging while transporting it.
Keep all wrappers after unpacking them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and the company shall not take any
responsibilities.
DO NOT drop the product or subject it to physical shock. Keep the device away from
magnetic interference.
Installation
When the device is mounted on wall or ceiling, the device shall be firmly fixed.
Avoid equipment installation on vibratory surface or places subject to shock (neglect may
cause equipment damage).
Power Supply
Make sure that the power has been disconnected before you wire, install, or disassemble the
device.
Please refer to technical specifications for detailed information.
Use the power adapter provided by qualified manufacturer.
Refer to the product specification for detailed power requirements. It is recommended to
provide independent power adapter for each device as adapter overload may cause
